PVC TYPICAL PROPERTIES - Plenum Boxes

Property	Units	Value(1)	ASTM Method
Physical
Density	g/cm³	1.42	D 792
Water Absorption	%	0.06	D 570
Rockwell Hardness	R Scale	115	D 785
Shore Durometer	D	89	D 2240
Cell Class	-	12454-B	1784
Mechanical
Tensile Modulus	psi	411,000	D 638
Yield Strength	psi	7,500	D 638
Flexural Modulus	psi	481,000	D 790
Yield Strength	psi	12,800	D 790
Izod Impact	ft-lb/in	1.0	D 256
Thermal
Vicat Softening Point	ºC/ºF	83/181	D 1525
Heat Deflection Temperature	ºC/ºF	82/179	D 648
Heat Deflection Temperature	ºC/ºF	80/176	D 648
Linear Coefficient of Expansion	in/in/ºC	5.8 x 10-5	D 696
Linear Coefficient of Expansion	in/in/ºF	3.2 x 10-5	D 696
Flammability Rating
Flammability	-	Self-Extinguishing	D 635
Flammability	-	0	UL 94V
Flame Spread	-	15	E 84
Chemical
Chemical Resistance	-	Class B	D 1784
Electrical
Electrical Volume Resistivity	Ohm/cm	5.4 x 1015	D 257
Dielectric Constant	60 Hz	3.19	D 150
Dissipation Factor	60 Hz	0.0096	D 150
Loss Index	60 Hz	0.030	D 150
Dielectric Strength	Volts/mil	544	D 149

¹ Physical properties of plastic sheeting are represented as "Typical." Information contained herein is considered accurate to the best of our knowledge. It is subject to your consideration and investigation, and is not to be construed as a representation or warranty expressed or implied. Our warranties are limited to those stated in formal contracts or in conditions of sale on our invoice and order acceptances. Conditions and methods of use may vary.

The "Typical" properties of our plastic sheet canot be automatically used when engineering finished components: and the fabricator or end user is reponsible for insuring the suitability of our products for their specific application or end user.