JOINT TIGHTNESS PER CLIENT'S INSTRUCTIONS

Evaluation of Joint Tightness per Client's Instructions

SGS U.S. Testing Company Inc.

SGS U.S. Testing Company Inc.
1341 North 108th East Avenue
Tel: 918-437-8333
Fax: 918-437-8487

July 9, 1998

Report Number: 109962-4

 

CLIENT:

JB Engineering & Code Consulting

 

1661 Cardinal Drive

 

Munster, IN 46321

 

Attn: Julius Ballanco

SUBJECT:

Evaluation of Joint Tightness per Clients Instructions

SAMPLE ID:

Three 6" 90º elbows, three sections of 6" plastic pipe, one can of IPS 600, one can of IPS 719, and one can of IPS primer were received on 6/16/98. The samples were received in good condition.

PROCEDURE:

Two of the 6" elbows were joined together by one section of pipe. The other two sections of pipe were attached to the other ends of the elbows to create a "U" shape test specimen. The test specimen was then lowered into a container of water until a pressure of 4 ft. of head was obtained on the joints. The specimen was then removed and checked for leaks. No revisions to this report will be allowed after 90 days of the report date."

TEST DATE:

7/10/1998

RESULTS:

No leaks in the joints were observed during the test.

CERTIFICATION:

The tests reported here were conducted under the continuous, direct supervision of SGS U.S. Testing Company Inc., Tulsa, OK.

Signed for the Company

Jeff Simmons
Dept. Manager/Product Evaluation

FIND US

General Plastics, Inc

3500 North Harrison,

Shawnee, OK 74804

Phone. 888-275-3171

Email. sales@general-plastics.com